Channel section (PFC) curving
Parallel Flange Channels, also commonly known as PFC, U-channels, C-channels, structural channel or simply channel, are vital components in building, construction and large fabrication projects.
Advanced Metal Curving roll channel sections from small glazing channels such as Nanorail up to 300 x 90mm PFC.
Please contact us to confirm capability with your application.
Profiles
Capabilities
Refer to the Capacity chart below as a guide of mild steel PFC curving options offered by Advanced Metal Curving. If your channel size is not listed below, don't assume it cannot be done! Please don't hesitate to contact us to enquire.
Capacity chart
Please wait for table to load ...
Please note:
-
Material size: This list is a guideline based on MILD Steel. We curve any and all sizes and thicknesses in between. If your project requires a different material thickness or type such as aluminium, please contact us with the details.
-
Orientation: Refers to the direction of the curve for members of unequal size, such as RHS or Angle. These can be rolled multiple ways. Please refer to the images above to specify the orientation.
-
Minimum inside radius: Refers to the tightest radius possible, measured to the inside of a continuous curve. Altering material type, thickness, or the addition of straight legs, tangents or multiple radii will affect the minimum radius.
-
Minimum green required per length: Green is the term used to describe the material (wastage) required on either end for the machine to take hold. This material remains straight and needs to be removed after rolling i.e. 500mm green per length = 250mm green each end. The remaining length will be usable curve. How much green depends on the section size, orientation and machine type.
-
Material supply: AMC can supply or customer free issue.
-
Transport notes: AMC have an overhead crane and forklift on site to handle loading / unloading of over-sized semi-trailers. Dimensions and weight can be supplied to assist you to organise freight.
Gallery
